Updated Feb-2022 Premium HPE6-A72 Exam Engine pdf - Download Free Updated 90 Questions
Authentic HPE6-A72 Dumps With 100% Passing Rate Practice Tests Dumps
HP HPE6-A72 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 13
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: B
NEW QUESTION 14
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION 15
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: A
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION 16
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION 17
Which network category applies to a SOHO internal network?
- A. Internet
- B. LAN
- C. WAN
- D. SD-WAN
Answer: A
NEW QUESTION 18
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command show running-configuration
- B. The command show system
- C. The command inventory
- D. The command version
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 19
Your customer has 349 users in a two-story building.
What are two benefits of a 2-Tier design? (Choose two.)
- A. Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.
- B. Use of layer 2 switches at the access layer can process and route traffic from attached APs.
- C. Provides a more cost effective solution given that no additional switches are required for a third tier.
- D. Improved performance by offloading processing from the Access layer to the Core.
- E. Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.
Answer: C,E
NEW QUESTION 20
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
- B. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
- C. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- D. VLAN 50 was never added to the vlan-database and therefore is in a down state.
Answer: C
NEW QUESTION 21
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?
- A. show interface gigabit 1/1/1
- B. show interface 1/1/1
- C. show interface vlan 1111
- D. show vlan 1111
Answer: B
NEW QUESTION 22
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. copy sftp://[email protected]/GL.10.04.0003.swi secondary
- B. copy secondary sftp://[email protected]/GL.10.04.0003.swi
- C. backup secondary sftp://[email protected]/GL.10.04.0003.swi
- D. copy secondary tftp://[email protected]/GL.10.04.0003.swi
Answer: B
NEW QUESTION 23
Which statement is correct regarding powering an Aruba Access Point?
- A. Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.
- B. Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.
- C. PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.
- D. PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.
Answer: B
NEW QUESTION 24
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)
- A. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
- B. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
- C. Utilize Spanning Tree to dynamically disable all redundant links in a segment.
- D. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
- E. Manually disable the redundant link to immediately resolve the impacted portion of the network.
Answer: C,E
NEW QUESTION 25
Refer to the exhibit.
Switch-1 is not the root bridge. The ports shown are all the connected pointtopoint interfaces. What Role (hidden by the blue rectangle) will be assigned to the Lag 1 interface?
- A. Designated
- B. Root
- C. Backup
- D. Alternate
Answer: B
NEW QUESTION 26
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. netstatus
- B. pathping
- C. traceroute
- D. ping
- E. tracert
Answer: C,D
NEW QUESTION 27
Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?
- A. Aruba 8400
- B. Aruba 5412r
- C. Aruba 6410
- D. Aruba 8408
Answer: A
NEW QUESTION 28
What is Deep Packet Inspection?
- A. a concept that applies to firewalls, when examining packets only up through Layer 4
- B. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address
- C. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
- D. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
Answer: D
NEW QUESTION 29
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION 30
What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)
- A. Peer switch-based detection
- B. BFD
- C. Loopback keepalives
- D. Management interface split detection
- E. ARP-based
Answer: D,E
NEW QUESTION 31
Refer to the exhibit.
Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?
- A. 0
- B. 1
- C. 2
- D. 01001011
Answer: C
NEW QUESTION 32
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command terminal length 30
- B. The command more
- C. The command page
- D. The command less
Answer: C
NEW QUESTION 33
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION 34
Refer to the exhibit.
What configuration is needed in order for "show LLDP configuration" to show this output?
- A. none; LLDP is enabled by default on Aruba switches
- B. enabling LLDP on the interfaces only
- C. configuring LLDP both globally and on the interfaces
- D. configuring LLDP globally only
Answer: A
NEW QUESTION 35
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION 36
What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)
- A. costs associated with upgrading from copper to fiber
- B. multiple frame copies leading to instability of the MAC address table
- C. security issues with a redundant loop indicating to hackers that a back-door exists
- D. routing loops
- E. broadcast storms
Answer: B,C
NEW QUESTION 37
......
How to schedule Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
To apply for the Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam, You have to follow these steps:
- Step 1: Go to the Aruba Certified Switching Associate (HP HPE6-A72) Professional Official Site. You must first create an account, use your email address to register. You must purchase your training through your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
- Step 2: Read the instruction Carefully
- Step 3: Follow the given steps
- Step 4: Apply for the Aruba Certified Switching Associate (HP HPE6-A72)-Professional Exam
For queries, contact your regional training team:
Get access to The Learning Center and get an HPE Learner ID. If this certification demands a written or online exam (HPE0 or HPE6 or HPE2), then generate a user profile with Pearson VUE, exam vendor for proctored/online exams. Practical exams are given through PSI or Aruba Education Services, consequently, no Pearson VUE user profile is needed.
Verified Pass HPE6-A72 Exam in First Attempt Guaranteed: https://pass4lead.premiumvcedump.com/HP/valid-HPE6-A72-premium-vce-exam-dumps.html