Try NS0-516 Free Now! Real Exam Question Answers Updated [Sep 19, 2023]
Get Ready to Pass the NS0-516 exam with Network Appliance Latest Practice Exam
NEW QUESTION # 34
What uses the Access Volume? (Choose the best answer.)
- A. Redundancy Check
- B. XOR parity calculations
- C. Asymmetric Logical Unit
- D. Legacy operating environments
- E. SMagent
Answer: E
NEW QUESTION # 35
What is the total number of ALUA paths from the host to a volume on the EF280 that is shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 36
An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume.
In this scenario, which statement is correct?
- A. Remove the mirroring relationship on the orphan, then re-create the mirroring relationship
- B. Suspend mirroring operations on the orphan, then resume operations
- C. Deactivate the mirror consistency group that contains the orphan, then re-enable the group
- D. Perform a role change on the orphan, then re-create the mirroring relationship
Answer: A
NEW QUESTION # 37
To discover events that need to be reported to the storage administrator, which log does the Event Monitor poll?
- A. Array Profile
- B. Major Event Log
- C. Recovery Guru log
- D. ASUP log
Answer: B
NEW QUESTION # 38
Which NetApp tool provides information on size, weight, acoustic noise, and power of NetApp E-Series systems?
- A. Interoperability Matrix Tool
- B. Hardware Universe
- C. Active IQ
- D. Config Advisor
Answer: B
NEW QUESTION # 39
Which command collects detailed diagnostic information from a Brocade FC switch?
- A. showsupport
- B. diagshow
- C. showdiag
- D. supportshow
Answer: D
NEW QUESTION # 40
Which three factors should you consider before you install an E2860 in a data center? (Choose three)
- A. current draw
- B. fire suppression capacity
- C. heat dissipation
- D. ambient temperatures
- E. electromagnetic interference
Answer: A,C,D
NEW QUESTION # 41
Which storage manager feature scans the system for issues, reports them, and suggests procedures that will correct the issue?
- A. Performance monitor
- B. Recovery guru
- C. Diagmon
- D. Event Log
- E. Storage array diagnostics
Answer: D
NEW QUESTION # 42
Multipath drivers provide which high-level features?
- A. They specify the rate of data transfer and reroute host requests.
- B. They check the state of known and discovered paths and monitor host connections.
- C. They identify a failed disk and its path.
- D. They present volumes as LUNs to the hosts and allow you to take them offline.
Answer: B
NEW QUESTION # 43
You need to run a command from the SANtricity System Manager GUI to mark drives as native by using the CLI tool on an E-Series system that is running System Manager 11.60 or higher.
In this scenario, where would you locate this tool?
- A. Help -> CLI Command Reference
- B. Settings -> System -> Addons
- C. Modify Existing Storage
- D. Support -> Support Center -> Diagnostics
Answer: B
NEW QUESTION # 44
Click the Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. wrong switch configuration
- B. protocol errors, encoding errors, or conversion errors
- C. faulty SFPs, cables, or patch panels
- D. twisted cables, wrong plugs, or cable material
Answer: C
NEW QUESTION # 45
What is represented by the Headroom graph on the SANtricity System Manager performance tab?
- A. the remaining performance capability of the physical objects in the storage system
- B. the percentage of CPU processing capacity that is being used by the operations on the system
- C. the resources that are being consumed by a defined workload
- D. the percentage of I/O associated with the backend disk drives
Answer: A
NEW QUESTION # 46
Which two errors would fail a pre-upgrade health check? (choose two.)
- A. An excess number of event log events are present
- B. Hot spares are in use
- C. I/O is being processed
- D. Volumes are reported on a non-preferred path
Answer: A,B
NEW QUESTION # 47
A customer has an E-Series system with several expansion enclosures and can use the ______ to determine if the connections between the enclosures have been cabled correctly. (Choose the best answer.)
- A. Major Event Log
- B. Host Mappings tab
- C. Recovery Guru
- D. Cable Connections report
Answer: D
NEW QUESTION # 48
Exhibit:
An administrator is asked to create a 5532 GiB volume from the volume group.
Referring to the exhibit how would the administrator complete this request?
- A. Create the volume after consolidating the capacity
- B. Create the volume from the available capacity
- C. Create the volume after adjusting the preservation capacity
- D. Create the volume after performing space reclamation
Answer: B
NEW QUESTION # 49
Which NetApp tool provides information on size, weight, acoustic noise, and power of NetApp E-Series systems?
- A. Interoperability Matrix Tool
- B. Hardware Universe
- C. Active IC
- D. Config Advisor
Answer: B
NEW QUESTION # 50
......
Pass Your Next NS0-516 Certification Exam Easily & Hassle Free: https://pass4lead.premiumvcedump.com/NetworkAppliance/valid-NS0-516-premium-vce-exam-dumps.html