Provide Valid JN0-636 Dumps To Help You Prepare For Security, Professional (JNCIP-SEC) Exam Jun 14, 2023
Juniper JN0-636 Dumps Questions [2023] Pass for JN0-636 Exam
NEW QUESTION # 15
You want to identify potential threats within SSL-encrypted sessions without requiring SSL proxy to decrypt the session contents. Which security feature achieves this objective?
- A. Secure Web Proxy
- B. encrypted traffic insights
- C. DNS security
- D. infected host feeds
Answer: C
NEW QUESTION # 16
Exhibit.
A hub member of an ADVPN is not functioning correctly.
Referring the exhibit, which action should you take to solve the problem?
- A. [edit interfaces]
root@vSRX-1# delete st0.0 multipoint - B. [edit security]
user@hub-1# delete ike gateway advpn-gateway advpn partner - C. [edit security]
user@hub-1# set ike gateway advpn-gateway advpn suggester disable - D. [edit interfaces]
user@hub-1# delete ipsec vpn advpn-vpn traffic-selector
Answer: D
NEW QUESTION # 17
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit interfaces]
user@srx# delete st0.0 multipoint - B. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner - C. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable - D. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION # 18
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The IPv6 address is invalid.
- B. The configured solution allows IPv4 to IPv6 translation.
- C. The configured solution allows IPv6 to IPv4 translation.
- D. External hosts cannot initiate contact.
Answer: A,C
NEW QUESTION # 19
You have set up Security Director with Policy Enforcer and have configured 12 third-party feeds and a Sky ATP feed. You are also injecting 16 feeds using the available open API. You want to add another compatible feed using the available open API, but Policy Enforcer is not receiving the new feed.
What is the problem in this scenario?
- A. You must wait 48 hours for the feed to update
- B. You have reached the maximum limit of 29 total feeds
- C. You cannot add more than 16 feeds with the available open API
- D. You cannot add more than 16 feeds through the available open API
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/sky-atp/information- products/pathway-pages/sky-atp-admin-guide.pdf page 110
NEW QUESTION # 20
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The c-1 TSYS cannot use any security flow resources.
- B. The c-1 TSYS can use security flow resources up to the system maximum.
- C. The c-1 TSYS has no reservation for the security flow resource.
- D. The c-1 TSYS has a reservation for the security flow resource.
Answer: A,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-profile-logical-system.html
NEW QUESTION # 21
You have a webserver and a DNS server residing in the same internal DMZ subnet. The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface. You implement DNS doctoring to ensure remote users can access the webserver.Which two statements are true in this scenario? (Choose two.)
- A. The DNS doctoring ALG is not enabled by default.
- B. The DNS CNAME record is translated.
- C. The DNS doctoring ALG is enabled by default.
- D. The Proxy ARP feature must be configured.
Answer: C,D
NEW QUESTION # 22
Which three roles or protocols are required when configuring an ADVPN? (Choose three.)
- A. OSPF
- B. BGP
- C. IKEv1
- D. shortcut partner
- E. shortcut suggester
Answer: A,D,E
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery- vpns.html
NEW QUESTION # 23
Exhibit
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION # 24
Click the Exhibit button.
[edit protocols ospf area 0.0.0.0]
user@host# run show security ike security-associations
Index State Initiator cookie Responder cookie Mode Remote
Address
3289542 UP 48d928408940de28 e418fc7702fe483b Main
172.31.50.1
3289543 UP eb45940484082b14 428086b100427326 Main 10.10.50.1
[edit protocols ospf area 0.0.0.0]
user@host# run show security ipsec; security-associations
Total active tunnels: 2
ID Algorithm SPI Life:sec/kb Mon lsys Port Gateway
<131073 ESP:des/ shal 6d40899b 1360/ unlim - root 500 10.10.50.1
>131073 ESP:des/ shal 5a89400e 1360/ unlim - root 500 10.10.50.1
<131074 ESP:des/ shal c04046f 1359/ unlim - root 500 172.31.50.1
>131074 ESP:des/ shal 5508946c 1359/ unlim - root 500 172.31.50.1
[edit protocols ospf area 0.0.0.0]
user@host# run show ospf neighbor
Address Interface State ID Pri Dead 10.40.60.1 st0.0 Init 10.30.50.1
128 35
10.40.60.2 st0.0 Full 10.30.50.1 128 31
[edit protocols ospf area 0.0.0.0]
user@host# show
interface st0.0;
You have already configured a hub-and-spoke VPN with one hub device and two spoke devices. However, the hub device has one neighbor in the Init state and one neighbor in the Full state.
What would you do to resolve this problem?
- A. Configure the st0.0 interface under OSPF as a point-to-multipoint interface.
- B. Configure the st0.0 interface under OSPF as a point-to-point interface.
- C. Configure the st0.0 interface under OSPF as a nonbroadcast multiple access interface.
- D. Configure the st0.0 interface under OSPF as an unnumbered interface.
Answer: A
NEW QUESTION # 25
The IPsec VPN on your SRX Series device establishes both the Phase 1 and Phase 2 security associations. Users are able to pass traffic through the VPN. During peak VPN usage times, users complain about decreased performance. Network connections outside of the VPN are not seriously impacted.
Which two actions will resolve the problem? (Choose two.)
- A. Verify that the PKI certificate used to establish the VPN is being properly verified using either the CPL or OCSP.
- B. Lower the MTU size on the interface to reduce the likelihood of packet fragmentation.
- C. Verify that NAT-T is not disabled in the properties of the phase 1 gateway.
- D. Lower the MSS setting in the security flow stanza for IPsec VPNs.
Answer: B,D
NEW QUESTION # 26
Click the Exhibit button.
You are implementing a new branch site and want to ensure Internet traffic is sent directly to your ISP and other traffic is sent to your company headquarters. You have configured filter-based forwarding to accomplish this objective. You verify proper functionality using the outputs shown in the exhibit.
Which two statements are true in this scenario? (Choose two.)
- A. The ge-0/0/5 and ge-0/0/1 interfaces can reside in different security zones
- B. The ge-0/0/5 and ge-0/0/1 interfaces must reside in a single security zone
- C. The session utilizes two routing instances
- D. The session utilizes one routing instance
Answer: A,D
NEW QUESTION # 27
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit. What is the cause of the error?
- A. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- B. The SRX Series device certificate does not match the JATP certificate
- C. The fxp0 IP address is not routable
- D. A firewall is blocking HTTPS on fxp0
Answer: A
NEW QUESTION # 28
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of four interfaces.
- B. The collector must have a minimum of five interfaces.
- C. The collector must have a minimum of two interfaces.
- D. The collector must have a minimum of three interfaces.
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/release-
independent/jatp/topics/task/configuration/jatp-traffic-collectorsetting-ssh-honeypot-detection.html
NEW QUESTION # 29
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Juniper ATP Cloud automatically creates the 3uopi'cioua_Endpoints feed after you commit the security policy.
- B. You must manually create the suspicious_Endpoint3 feed in the Juniper ATP Cloud interface.
- C. The 3uspicious_Endpoint3 feed is only usable by the SRX-1 device.
- D. The 3uspiciou3_Endpoint3 feed is usable by any SRX Series device that is a part of the same realm as SRX-1
Answer: C,D
NEW QUESTION # 30
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The session information indicates that the IPsec tunnel has not been established
- B. NAT is being used to change the source address of outgoing packets
- C. The remote gateway address for the IPsec tunnel is 10.20.20.2
- D. The local gateway address for the IPsec tunnel is 10.20.20.2
Answer: C
NEW QUESTION # 31
Exhibit
You are using traceoptions to verity NAT session information on your SRX Series device Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The SRX device is changing the source address on this packet from
- B. This is the first packet in the session
- C. The SRX device is changing the destination address on this packet 10.0.1 1 to 172 20.101.10.
- D. This packet is part of an existing session.
Answer: B,C
NEW QUESTION # 32
......
Achieve Success in Actual JN0-636 Exam JN0-636 Exam Dumps: https://pass4lead.premiumvcedump.com/Juniper/valid-JN0-636-premium-vce-exam-dumps.html